Diamond shower screen: two mitred panels and a door across the corner
For a diamond-shaped base in a corner. A panel off the back wall and one off the side wall, each cut with a 45° mitre, and a standard door across the angled front between them on 135° hinges. Measure the run along each wall to the corner of the glass and the angled front corner to corner.
Best for: Corner showers on a diamond (neo-angle) tray or tiled base, typically 900 × 900.
Supply + install, from
$2,247
inc. GST, measured, fitted and sealed. 2 install visits after the check measure.
Supply only, from
$1,147
inc. GST, in stock sizes. Your size may differ.
How installation works · How to measure it yourself
What's included in the price
- 3 toughened glass panels, polished edges, cut-outs and holes
- Wall brackets
- Fixed panel seal
- glass to glass 135 hinges
- Door seal kit
- Door knob
- Neutral-cure silicone
Installing it yourself, you'll also need a drill with masonry bits, packers, a 2 m level, suction cups or a second person to lift, and neutral-cure silicone if it isn't in your list. Or choose supply + install and we bring all of that.
Panel sizes for the example above (mm)
Questions
- How do the panels meet the door?
- The two side panels are mitred at 45° on their free edge, so the door, which has ordinary square edges, meets each one at 135°. One carries the 135° hinges; the door closes onto the other with a 135° seal.
- Can I pick the door width?
- The door fills the angled front, less a 5 mm hinge gap and a 5 mm closing gap. A front of 560 to 710 mm takes a stock door; the side panels are always made to order because of the mitre.
- Which panel carries the hinges?
- The one on the side wall by default. Mirror the layout to hinge off the back-wall panel instead.
- Where do you deliver?
- Across the Illawarra, Helensburgh to Gerringong, or pick up free from Unanderra NSW 2526. Delivery details.